For years, that meant thinking of resistance exercise in absolute terms. A workout wasn’t a success unless I could no longer move my muscles at the end of a session, even if I needed a spotter to save me from being crushed by a barbell (yeah, that happened). 

But, what if I told you that pushing your muscles to the point that they can’t lift a weight isn’t the point? 

Whether you’re trying to add muscle mass, improve a few muscle groups, or are just using resistance training to improve your overall health, the idea of seeking failure is misunderstood and misapplied, and a big reason why many people don’t see amazing results from their workouts.

There’s a big difference between breaking a muscle down so it can grow, and demolishing it to the point that it’s harder to recover. 

Muscle growth is directly connected to muscle fatigue. But, if you want to build stronger muscle fibers or add muscle mass, failure is best used sparingly.

In fact, in most cases, the best approach for both short- and long-term growth is about finding a way to push yourself hard, add reps, sets, and weights, without hitting that point where your muscles stop working. (And that’s separate from injuries, which are much more likely when training to failure.)

To help you understand how hard to push and the right intensity for your workouts, we turned to Jordan Syatt, owner of Syatt Fitness. In this post, he provides 5 different questions that you should consider to help you build a more effective approach to your workouts. -AB

Should You Train to Failure?

By Jordan Syatt

Think back to the first time you ever lifted weights. What did you do?

You probably walked up to a dumbbell rack, picked up the heaviest weight you could hold, and performed some exercise movement — heck, any exercise movement — to the best of your ability. Rep after rep after rep. And you did so until you could no longer move the weight. 

Then you rested, probably until you felt fresh again, and repeated the process. Sometimes, a little naivety and simplicity is a good thing.

But, that simplicity is also why so many people are frustrated by what they do in the gym. Beyond the exercises you perform and the frequency and volume of your workouts, most people don’t know how hard to push on any given set. 

They don’t know how to build muscle. And they don’t know how to build strength. What they do know how to do is perform exercises listed in their training session.

There’s an important distinction. The results you see from your time spent in the gym is a combination of many factors. For muscle growth, it’s a matter of muscular tension, metabolic stress, and muscular damage. There are many ways to manipulate those variables, but most people assume that pushing every set to the last rep where your muscles are aching is what needs to be done.

It’s the reason why “training to failure” is one of the most highly debated topics in the fitness industry and, truth be told, it’s extremely misunderstood.

I’ve spent enough time studying the topic to know that there’s no simple answer. Some people swear that taking every set to failure is the secret to success while others insist it’s a recipe for guaranteed injury and “overtraining.”

The answer, as most things in life, depends entirely on the individual as well as their needs, goals, and preferences.

If you’re going to commit to training sessions, you might as well make sure you’re personalizing those workouts as much as possible. 

So, before you take another set to muscle failure, here’s what you need to consider. 

Question 1: Is Training to Failure Necessary for Muscle Growth?

Research on training to failure is, unfortunately, scarce. Increasing muscle hypertrophy is often necessary for physique competitors and strength athletes to improve performance. Since training to failure “may activate a greater number of motor units” and potentially enhance muscle hypertrophy, training to failure is often warranted among these individuals.[2] 

Willardson et al. is perhaps the highest quality review of the literature pertaining to failure-based training. After examining the data, the authors concluded that training to failure is a valid method to use in order to enhance muscle hypertrophy, facilitate maximal strength gains, and break through plateaus.

However, it’s important to note that Willardson also stated “training to failure should not be performed repeatedly over long periods, due to the high potential for overtraining and overuse injuries. Therefore, the training status and the goals of the lifter should guide the decision-making process on this issue.”

Linnamo et al. found that training to failure resulted in a significantly greater increase in the secretion of growth hormone compared to non-failure based training. While this finding in no way, shape, or form proves that training to failure is better than other methods, it may lend credence to the success so many athletes, bodybuilders, and fitness enthusiasts have had with failure-based training.

There are other studies, but what really what matters is, how does this apply to you?

So let’s start there: You. After all, it’s your goals and training style that will play the biggest role in determining if and when you should push your body to failure. And that decision comes down to asking 5 questions.

Question 2: Are you Breaking the 90-Percent Max Rule?

Training intensity is perhaps the single most important factor in deciding whether or not training to failure is effective or even appropriate. Training intensity refers to the percentage of weight being lifted in relation to an individual’s 1-repetition maximum (1-RM).

In my opinion, training to failure at intensities at, or above 90 percent of your 1-RM should be avoided. 

Training to failure with such heavy weights will do very little (if anything) to enhance muscle hypertrophy and may actually hamper strength gains. If you’re going to hit absolute or complete failure, you don’t want to do it with the maximum amount of weight you can push, press, deadlift, or squat. 

Furthermore, training to failure with near maximal weights will almost inevitably result in a breakdown of technique, drastically increasing the likelihood of injury. Don’t get it twisted: weightlifting is a lifetime activity, but you need to be smart about the risks you take. 

Generally speaking, training to failure should be reserved for training percentages ranging from 50 percent to 85 percent of your 1-rep max. 

While I rarely prescribe training to failure at either of these end-ranges, I believe that they are appropriate guidelines to follow for a majority of intermediate and advanced trainees.

Keep in mind, though, training to failure at 50 percent of your 1-RM can take an inordinate amount of time to complete and may not be well suited for those with time restrictions. On the other hand, 85 percent of your 1-RM is still heavy weight and the use of a spotter is strongly encouraged.

Question 3: How Often Should You Train to Failure? (Check Your Training Age)

There are three major categories signifying the current “level” of a given trainee. I call this “the trainee continuum” and they are: beginner, intermediate, and advanced.

An individual’s training status will determine what they need, and therefore someone who is a beginner might require unique methods of training that may substantially differ from someone who is at an intermediate or advanced stage.

For example, beginner trainees must, first and foremost, work on developing proper form and technique in compound movements such as the squat, bench press, deadlift, and chin-up.

Consequently, training beginners to absolute failure would likely do more harm than good as maintaining proper form becomes exceedingly difficult in a fatigued state. 

In other words, if you’re a beginner and haven’t been training for, at least, 2 years consistently, then you’re likely best off not pushing to muscle failure, even when you’re below 90 percent of your 1-RM.

What to do instead? You can try the “reps in reserve” (or RIR) method. RIR is great for beginners and also incredibly effective for advanced lifters. 

Instead of pushing towards complete failure, you want to push to a different level of fatigue. For example, you’ll set a goal rep range (say, 8 reps) and make sure you have 2 reps in reserve (2 RIR). This way, you’re able to work towards a level of intensity that challenges your muscles, but you’re purposely leaving a number of reps in the tank. 

It can take trial-and-error to figure out how many reps you truly have in reserve, but — when you do — it’s a great way to add reps, weight, and more sets, while mastering form, fatigue, and recovery. 

If you’re not a beginner, intermediate and advanced trainees can push to failure more often. If you’re following the 90-percent rule, and sticking between 60 to 85 percent of your 1-rep max, you can train to failure between 2-4 times per week. 

How do you know how often you should push? Glad you asked because that will depend on your goal and the exercises you perform. 

Question 4: What is Your Goal?

An individual’s desired goal will dictate numerous components of their program, not least of which includes whether or not they should train to muscular failure.

Take, for example, the differences between powerlifters and bodybuilders. Powerlifters are focused on maximal strength development (including training their nervous system to handle more weight). Consequently, they train at relatively high intensities of their 1-RM. Additionally, powerlifter’s place a distinct emphasis on full-body, compound movements, which require a great deal of skill to maintain proper form.

In bodybuilding, the goal is muscle growth and, as a result, train at comparatively lower intensities of their 1-RM because strength is not always the answer. What’s more, bodybuilders tend to emphasize smaller, isolation movements designed to target individual body parts, which require less skill to maintain proper technique.

Because of these different approaches and the types of exercises performed, bodybuilders are able to train to failure more frequently than powerlifters. 

It’s important to note, however, that many elite powerlifters also train to failure on a regular basis. In fact, as a world record powerlifter myself, I regularly utilize failure-based training within my programs. That being said, I rarely train to failure in big, compound movements and almost exclusively use intensities between 60 percent to 80 percent of my 1-RM.

Question 5: What Exercises Are You Performing?

The more skill required for a lift, the less frequently it should be performed to failure. Conversely, the less skill required to perform a lift the more acceptable it becomes to train to failure.

Snatches, for example, are arguably the single-most complex lift and training them to failure is dangerous. Simpler multi-joint movements, such as variations of the chin-up, bench press, and lunge, are suitable for failure-based training but should be performed with extreme caution. Same can be said for exercises like squats.

Finally, single-joint exercises, including bicep curls, triceps extensions, and calf raises, are the least complex of movements and are far more appropriate to train to failure.

Question 6: What is Your Mindset?

Failure occurs when an individual is unable to complete another full repetition. This tends to happen due to the onset of fatigue.

Fatigue, however, is a truly subjective term and is nearly impossible to quantify. Based on pain tolerance, willpower, and other psychological factors, what constitutes muscular failure for one individual may only be slight discomfort to someone else. As such, it’s difficult to know whether a given individual is training to true muscular failure or simply cutting the set short.

Furthermore, it’s important to note that while some individuals derive pleasure from training to failure, others do not and attempting to force them may, in fact, deter them from strength training. Understanding the psychology of your clients (or yourself) and how they respond to training is of the utmost importance to long-term program adherence.

While it’d be easy to make a blanket statement about training to failure, ultimately it depends on your answers to the questions above. Failure-based training is a valuable tool in your training arsenal when applied correctly. If it fits your goals, needs, and preferences then use it wisely and with caution

Stop Failing. Start Succeeding

At Born Fitness, we help you make sense of fitness and nutrition information. If you want to create a plan for your life, here’s how you can stop guessing and start living healthier.

READ MORE: 

3 Rules for Building Bigger Arms

Faster Fat Loss: How to Add Workout Finishers

How Low Should You Squat, Really?

Works Cited

[1] Aragon, Alan. “Training to Failure.” Alan Aragon Research Review. Alan Aragon, Mar 2009. Web. Web. 9 Mar. 2013.

[2] Schoenfeld, Brad. “The Mechanisms of Muscle Hypertrophy and Their Application to Resistance Training.” Journal of Strength and Conditioning Research. 24.10 (2010): 2857-2873. Web. 10 Mar. 2013. <http://www.ncbi.nlm.nih.gov/pubmed/20847704>.

Adam Bornstein

Adam Bornstein is a New York Times bestselling author and the author of You Can’t Screw This Up. He is the founder of Born Fitness, and the co-founder of Arnold’s Pump Club (with Arnold Schwarzenegger) and Pen Name Consulting. An award-winning writer and editor, Bornstein was previously the Chief Nutrition Officer for Ladder, the Fitness and Nutrition editor for Men’s Health, Editorial Director at LIVESTRONG.com, and a columnist for SHAPE, Men’s Fitness, and Muscle & Fitness. He’s also a nutrition and fitness advisor for LeBron James, Cindy Crawford, Lindsey Vonn, and Arnold Schwarzenegger. According to The Huffington Post, Bornstein is “one of the most inspiring sources in all of health and fitness.” His work has been featured in dozens of publications, including The New York Times, Fast Company, ESPN, and GQ, and he’s appeared on Good Morning America, The Today Show, and E! News.

The post Training to Failure: 5 Questions You Need to Answer appeared first on Born Fitness.

That’s the case with the traditional back squat. One of the most well-known and timeless exercises, and also one of the most controversial.

No matter how you view the back squat, squatting is an essential movement, regardless of whether you perform it with weight on your back.

Most of the disagreements focus on the safety of the movement. Some people believe that it’s too easy to get hurt doing squats. And, if you’re avoiding them, odds are you’re either worried about the same outcome or already have experienced some injury or pain while performing them.

If you’re not doing some variation of the squat, you’re training plan is most likely flawed.

We like to look at things a different way: if you can’t sit down (which is what squatting is) without hurting yourself, then the worst thing you can do is avoid the movement entirely.

Whether you want to squat with a weight on your back is up to you, but don’t let that stop you from cleaning up little mistakes that are causing pain or limiting your workouts.

If you want to move better, and see better results from your workouts, here are simple ways to ensure you don’t get hurt while doing one of the most fundamental human movements.

Why Do Squats Hurts?

Part of what makes squats great is also what connects them to injuries. Squats are a compound exercise, meaning that many muscles are involved in the movement. Everything from your quads, hamstrings, glutes, back, and even your abs light up when you squat.

While those muscles are all involved, you don’t necessarily want them doing the heavy lifting. And, that’s why a great movement for your lower body can easily turn into something like back pain.

If you want to move pain-free and keep tension on the muscles designed for the movement, you simply need to recognize where you feel “off.”

And, it’s important to recognize that the way you squat is dependent on your body. As we’ve broken down in detail, there’s not even one squat depth that’s universally correct—how low you should go depends on who you are. (Remember, personalization is a vital part of exercising.)

Instead, we’ll help you address any issues you feel when you squat, make it easy to identify why you struggle, and then make the necessary adjustments.

Whether you back squat, front squat, goblet squat, or perform single-leg variations, these tips and cues will ultimately make you better at squatting, identify weaknesses, and help prevent injury and pain.  

The Problem: Weak Grip

When I watch someone squat, the first place I look tends to surprise people. I like to watch the grip and upper back.

Why? Because most people barely take hold of the bar and activate the muscles that are designed to keep your body safe.

Most people, especially when they have a bar on their back, try to spend a lot of time finding a comfortable spot on their upper back. In doing so, they miss a key first step.

The Squat Fix: When you set up for a squat, you want to grip the bar as hard as possible and try to pull your elbows under the bar. If you just drop into a squat, you’ll feel unstable during the movement.

More tension in your hands and upper back create full-body tension. This tension will help you squat down with greater control and protect your spine and lower back. Not to mention, the activation of these muscles will also help you produce more force and lift more weight without getting injured.

The Problem: Leaning Forward

A popular squat cue is to keep your chest up and for a good reason. If you’re bending too much at your hips, it’s very hard to keep tension on the muscle in your lower body.

Falling forward transfers the weight away from your quads and shifts more to your glutes and hamstrings or potentially your lower back.

The Squat Fix: We could say this about every exercise, but start by dropping the weight and ensuring that your body can handle what you’re lifting. With squats especially, your body sends you lots of signals that scream, “This is too much!” Folding in half as you lower and sit down is one of those signs.

Then, work on keeping your elbows pulled down (facing the ground) and your chest up. This will ensure that the torso remains more upright throughout the lift.

You’ll also want to focus on your flexibility and mobility (more on this soon). Tight ankles, hips, and upper back will prevent you from hitting a good squat pattern. And, this will only get worse as the weight increases.

The issue could also be linked to weak core muscles (your abs) or weak quads. Instead of putting a bar on your back, strengthen your knee extension and stability with exercises like step-ups, Bulgarian split squats, and lunges.

The Problem: Poor Ankle Mobility

Ankle mobility is an issue for most because, well, most people don’t work on it. And, our reliance on stabile footwear makes your feet feel comfortable while compensating for the ability to build stronger, more durable, and more mobile ankles.

Losing mobility in your ankles means your shins don’t move forward naturally when you squat. If your shins aren’t moving forward, your movement pattern is altered and it can create unnecessary stress on your knees.

For years, fit pros have loved sharing pics of babies and toddlers squatting to prove how natural it is for humans to squat deep. Instead of focusing on the depth, look at the angle formed by their shins, which is enabled by better ankle mobility.

The Squat Fix: If you’re looking for more depth, a simple fix is placing a 5- or 10-pound plate under your heels and then squatting. The little change will help you sink into your heels when you sit down and achieve a deeper squat. By putting the plate under your heels, you compensate for a lack of ankle mobility.

If you want to fix the problem (which we recommend), try adding ankle mobility drills, which help restore normal ankle movement and improve squat form.

One popular drill requires you to face a wall in a staggered stance with your forward foot about 1-foot away from the wall. Then, try to drive your front knee forward towards the wall as far as you can.

Another simple exercise is to trace the “ABC’s” with your big toe on each foot. Try to “draw” each letter as a way to challenge your ankles with movement in each direction.

The Problem: Collapsing Knees

Next time you squat when holding a weight, have someone take a video or watch your knees in the mirror. How much are your knees (or one knee) caving inwards? A little bit of movement can be OK. But, if one knee looks like it wants to kiss the other (or both knees are making the move), it’s time to fix the issue and prevent a serious injury before it happens.

The Squat Fix: The caving knees (AKA “valgus collapse) could be a technique flaw, mobility issue, or weakness.

The wall squat is a simple way to test if this is an issue (without needing weight). Stand facing a wall with your feet about 6 inches away. Squat as far as you can. You will immediately see if your hips, ankles, and upper back have any mobility issues and you’ll notice how your knees track.

If this is a problem, shift to Goblet squats, making sure you go as deep as possible, while keeping your lats and core braced and forcing your knees out. This will provide dynamic mobilization of your hips.

Warning: this probably won’t be enough to fix the issue. Strengthening your glutes will help you keep your knees out during squats. Glute bridges and barbell hip thrusts will be your primary focus for your glutes, which are your primary hip abductors and will reduce the weakness causing the collapse.

The Problem: Incorrect Breathing

If you are not inhaling (deep breath in) as you move down into the squat and exhaling as you drive up and out of the hole, you’re not taking advantage of intra-abdominal pressure (IUP). This, along with the bracing of your torso, is your natural lifting belt.

The Squat Fix: Before each rep, take a big breath and brace your torso. Then, squat down, pause, and as you come up, exhale forcibly through pursed lips at the most challenging portion of the lift. This tension and bracing will help keep you safe and injury-free.

The Problem: Using a Belt on All Sets

Belts (much like lifting straps) are not a bad thing. But, you need to know how to use them appropriately. They should be there for assistance and not reliance. When squatting, there are a lot of lifters who wear a belt for all their sets. This much dependency on a belt will not help you develop a strong, functional core.

Squat Like a Pro: By putting off wearing a belt until the heavier sets, you’ll be increasing your overall full-body strength and potential for remaining injury-free. As a rule of thumb, you should work up to the point where you don’t put on a belt until you are around 70 percent of your one-rep max (1RM).

READ MORE: 

The Mystery of Squat Form: How Low Should You Go, Really?

Why Weight Machines Are Better Than You Think 

The Tension Weightlifting Technique: How to Make Every Exercise More Effective

Adam Bornstein

Adam Bornstein is a New York Times bestselling author and the author of You Can’t Screw This Up. He is the founder of Born Fitness, and the co-founder of Arnold’s Pump Club (with Arnold Schwarzenegger) and Pen Name Consulting. An award-winning writer and editor, Bornstein was previously the Chief Nutrition Officer for Ladder, the Fitness and Nutrition editor for Men’s Health, Editorial Director at LIVESTRONG.com, and a columnist for SHAPE, Men’s Fitness, and Muscle & Fitness. He’s also a nutrition and fitness advisor for LeBron James, Cindy Crawford, Lindsey Vonn, and Arnold Schwarzenegger. According to The Huffington Post, Bornstein is “one of the most inspiring sources in all of health and fitness.” His work has been featured in dozens of publications, including The New York Times, Fast Company, ESPN, and GQ, and he’s appeared on Good Morning America, The Today Show, and E! News.

The post Why Do Squats Hurt? (And How to Fix The Problems) appeared first on Born Fitness.

There are seemingly two main camps that disagree about the relationship between muscle and metabolism. On one side, some people believe that build more muscle means your metabolism works at a much higher rate and burns more. On the other side, you have people who suggest muscle does not burn that many calories, so its impact on your daily calorie burn is minimal.

As it turns out, technically, both sides are correct. 

Before you lose your mind, research paints a clear picture of what’s likely best for your body if you want to improve your metabolism and support fat loss or a healthy weight. 

How Many Calories Does Muscle Burn? (Be Prepared to Be Disappointed)

For as long as I can remember, people have stated that for every 1-pound of muscle you gain, your body burns an additional 50 calories. On paper, this sounds awesome. Add 5 pounds of muscle, and you’ll burn an extra 250 calories per day, or about a pound every 2 weeks. 

The philosophy has led to plenty of people rationalizing increasing how much they eat with the belief that their muscle mass will prevent additional weight gain.

Unfortunately, it’s not true.

Research suggests that every pound of muscle is more likely to burn about 6 calories per day. 

You’re probably thinking, “Just 6 calories?”

Comparatively, a pound of fat will burn approximately 2 calories per day. 

This isn’t exactly the best campaign for weight training. But, focusing on how many calories muscle burns is only a small piece of the metabolism picture. 

If you really want to understand the impact on your metabolism, you have to look at what it takes to build muscle. 

Better Question: Does Building Muscle Improve Your Metabolism?

It’s important to differentiate the metabolic benefits of having muscle and building muscle. 

While adding 10 pounds of muscle could take years and only burn about 60 extra calories per day when all is said done, the work you’d need to put in to build (and maintain) that muscle would still positive changes for your body and metabolism.

In fact, research has shown that weight training burns more calories than we originally thought — and the act of resistance training can keep your metabolism elevated for up to 48 hours after you finish your workout. 

Some research suggests that 90% of the total calories you burn from weight training might occur after you finish your workout because of the “afterburn” effect. 

That’s not to say that weight training doesn’t burn a lot of calories while you’re training. Research from Christopher Scott suggests that an 8-minute high-intensity circuit can burn up to 250 calories. And that’s just 8 minutes, which shows you how many calories you might be burning if you can potentially double that amount from the afterburn. 

Research also suggests that building muscle improves your insulin sensitivity, which means you process carbs more efficiently and you lessen the likelihood of diabetes. 

That’s a fancy way of saying more muscle changes the way that your body reacts to food. That’s because your muscles need the energy to repair, maintain, or grow.

So, the more muscle you add, the more your body processes food and calories differently and makes it less likely that what you eat will be stored as fat. 

Is Exercise Necessary for Fat Loss?

There are many ways to burn calories. And, if you’re trying to lose weight, research suggests that you’re going to need to make dietary changes. 

However, just because your earned muscle won’t burn calories all day doesn’t mean that earning that muscle isn’t a key part of your ideal fat-loss plan. 

Research has compared people who exercised 3 times per week doing cardio (aerobic exercise), aerobic exercise and weight training, or no exercise at all.

The exercise groups lost a similar amount of weight, but the people who were lifting weights lost about 40 percent more fat. (The total amount of exercise time was the same between cardio-only and the cardio and weights conditions.)

In general, research examining people who diet compared to those who weight train find that weight training helps you preserve (or gain) muscle and lose more weight from fat. The benefits change how you look and feel after you’ve lost weight, and increase the likelihood that you’ll keep the weight off. 

What’s the Best Metabolism Boost?

Your metabolism is very complex and, oftentimes, misunderstood. The biggest impact on your daily calorie burn has nothing to do with exercise. About 50 to 70 percent of your daily calorie burn (AKA energy expenditure) is used for the basic function of staying alive, such as powering your heart, lungs, and brain. 

The basic functioning of your metabolism is also partially dependent on your body size. The bigger you are and the more you weigh, the more calories you burn. The idea that thin people have faster metabolisms is actually a myth because body weight is directly tied to the most significant impact on your daily calorie burn. 

Another 10 percent of your metabolism is influenced by what you eat. Also known as the “thermic effect of food” (or TEF), it’s the rate at which your body burns proteins, carbs, and fats. And, it’s the reason the number of meals you eat doesn’t matter and why protein is helpful when trying to lose fat. 

The rest of your metabolism — anywhere from 20 to 40 percent — is then influenced by physical activity. This is a combination of walking, daily movements (like fidgeting or standing up and sitting down), and your traditional exercise. 

The more muscle you have, the more likely you are to earn it from workouts. And, the more you work out, the more intensity you can apply to those workouts to improve your metabolism. 

While exercise will never be the primary mover of metabolism, science does suggest that the process of building or maintaining muscle can have a significant impact on your metabolism and help with fat loss. 

Read More:

How Much Fat Should I Eat?

Is Sugar Bad For You? (You’ll Be Surprised)

Understanding Proteins, Carbs and Fats

Adam Bornstein

Adam Bornstein is a New York Times bestselling author and the author of You Can’t Screw This Up. He is the founder of Born Fitness, and the co-founder of Arnold’s Pump Club (with Arnold Schwarzenegger) and Pen Name Consulting. An award-winning writer and editor, Bornstein was previously the Chief Nutrition Officer for Ladder, the Fitness and Nutrition editor for Men’s Health, Editorial Director at LIVESTRONG.com, and a columnist for SHAPE, Men’s Fitness, and Muscle & Fitness. He’s also a nutrition and fitness advisor for LeBron James, Cindy Crawford, Lindsey Vonn, and Arnold Schwarzenegger. According to The Huffington Post, Bornstein is “one of the most inspiring sources in all of health and fitness.” His work has been featured in dozens of publications, including The New York Times, Fast Company, ESPN, and GQ, and he’s appeared on Good Morning America, The Today Show, and E! News.

The post Does Having More Muscle Really Increase Your Metabolism? appeared first on Born Fitness.

But, it doesn’t take long to realize that the squatting commandments you’ve been hearing for years are very flawed. Case in point: ever been told that your “knees shouldn’t go over your toes” during the squat? Somehow, this idea has lived for decades despite the fact that it’s not true.

Automatically assuming that your knees shouldn’t go over your toes is a great way to ensure that you put a lot of stress on other structures, such as your lower back (as a result of hips), hamstrings, or even your calves. If you’ve tried this approach, you might find that squatting suddenly feels very uncomfortable (note: uncomfortable is different from difficult). And, that’s never a good thing and likely a sign that the movement you’re forcing isn’t going to make your body feel good.

Research supports why allowing your knees to go over your toes isn’t necessarily a bad thing. In one study, participants were restricted from moving their knees in front of their toes. The results? It led to a slight reduction in knee torque (22%) but at the cost of a massive increase in hip torque (1070%).

This suggests that if you apply a movement standard for everyone, it’s likely to cause stress in unintended ways, and this massive increase in stress is likely to lead to injuries, aches, and pains.

It’s perfectly fine for your knees to go over your toes as long as your heels are planted on the ground and your weight is balanced over your natural center of gravity.

The only squat stance that is “right” is the one that is suited for your body. That means it’s time to unlearn what you’ve been taught and start figuring out a better way to squat for your body. Once you do, everything feels better, hurts less, and you’ll become stronger.

Is Squatting Good For You?

“Is it good to squat?” is a fair question, but one with an easy answer. Yes. Sitting down and standing up is one of the most basic movements in life.

Whether squatting is good is not a debate, but form and depth are topics of intense disagreement. The biggest thing you need to remember is that everyone is going to squat a little differently. Your squat form might not look like the ones you see in the pictures or those little “squat form demonstration” illustrations. 

Your knee attaches to 3 main muscle groups: your hamstrings and calves in the back the quadriceps in front. These muscles also play a key role in your hip movement. Translation: When your muscles contract, they work together to balance out force and keep your knees (and other structures) healthy.

Remember the study we mentioned above and how it increased hip torque by more than 1,000 percent? Trying to follow those how-tos might be why your squat form doesn’t feel quite right—or perhaps why squats feel painful. Following a movement built for someone else’s body type isn’t a good idea.

This, of course, is the reason why squats hurt so many people, get a bad reputation, and why you are often tempted to skip this move in your workout, even though you should do it.

No one is going to give you an extra million dollars for squatting deeper.

Making matters worse, the more that you read about squat form, the more likely you are to find conflicting information. On one side you have the purists. They’ll tell you that you must squat “ass-to-grass.”

At the opposite end of the spectrum, are the overly cautious types who worry that squatting too low will damage your knees (it won’t, by the way). And there are plenty of others who will advocate for stopping at seemingly every other point in between—thighs parallel to the ground, or just below it, or well above it (known as quarter squats), and on and on.

No one is “right” but everyone is wrong unless they are showing you how to figure out the right squat depth and stance for your body.

“There’s no one right way to squat—and there’s no one wrong way, either,” says Dean Somerset, C.S.C.S., an exercise physiologist in Edmonton, Alberta Canada. “It’s all about finding what works for your body.”

What’s right for you depends on your goals, strength, and level of mobility, which are things you can influence. But, not everything that determines how well you squat is within your control.

Your body’s bone structure will affect how you move too. Because of all that, many of the standard squat cues you hear about where your feet should be or what direction they should point may not actually work for you. (But don’t worry, we’ll show you what will.)  

The bottom line: Forget the politics. Forget all the “one-size-fits-all” opinions. There are a lot of ways you can go about fixing squats when they hurt. We’re going to break down the different types of squat depth and share a test that can help you start to personalize your approach. 

By the time you’re done reading, you’ll know the right range of motion for your body, so you can get the most out of the squat.

The Deep Squat

Being able to execute a full deep squat is a good thing, but it might not be your thing. Doing the move requires a full range of motion at all four of the body’s major load-bearing joints (the ankles, knees, hips, and shoulders) and proper mobility throughout the spine. Those joints, your muscles, and your brain all have to work together to achieve this position:

That demonstration comes from Georges Dagher, C.S.C.S, a chiropractor and strength coach based in Toronto. He likens the deep squat to brushing your teeth. “From my perspective, the deep squat movement is a toothbrush for our joints, ensuring they are all moving without any sticky or restricted areas,” Dagher writes in the Journal of Evolution and Health.

Just as you brush your teeth every day, Dagher suggests performing at least one bodyweight squat per day, as deep as you can.

If you look at the photo above and think “no way,” don’t stress. Lots of people have strength or mobility issues that can make achieving a deep squat challenging—at least at first.

The good news? By simply working on your deep bodyweight squat form, going as deep as you can with control, and holding as long as you feel reasonably comfortable, you’ll help address and improve those issues.  

“The positions we place our bodies in will have an effect on various elements such as muscles, which can improve our comfort in the squat,” Dagher says.

You can also get more comfortable by adjusting your stance. Somerset explains that the standard squatting position— “stand with your feet shoulder-width apart…” —doesn’t apply to everyone. It’s more of a general recommendation or an average, he says, not a hard-and-fast rule.

To help his clients reach a deeper, pain-free squat, Somerset has them experiment with different stances until they find one that feels right.

“Think of it like going to the optometrist, when they put the lens in front of your eyes and ask which one is better,” Somerset says. “There’s no one standard prescription. It’s about finding the right one for you.”

Here are the two main elements Somerset asks clients to adjust when they dial in their stances for ideal squat form:

• The direction of your toes: Try them pointing straight ahead first. Let’s call that 12 o’clock. Squat as deep as you can. Now turn your feet outward slightly – think left foot pointing at 11 o’clock, right foot pointing at 1. Try the deep squat again. Now angle them even farther outward, to 10 and 2. Squat again. Notice which position feels the most natural and allows you to sink the deepest.  

• The width of your feet: Start with them set shoulder-width apart. Then, gradually try wider distances, giving each the bodyweight squat test and noticing which feels the most natural. One thing to note: The wider your stance is, the more the exercise will emphasize your glutes (the muscles in your butt), and the less work it’ll put on the quads (muscles of your upper leg around the knee).

Here’s more good news: Even if your range of motion is limited, you probably squat more throughout the day than you think. “Most of us can squat to at least a 90-degree angle,” says Dagher. “We do that every day, every time we climb into our car or get up from a chair.”

Each of those moments is an opportunity to practice lowering yourself into a 90-degree squat with control. Think of them as box squats you do throughout the day; don’t just plop onto the cushion, says Dagher. Doing this throughout the day can shore up your stability and make you a better squatter in the future.

Why You Can’t Squat Deep

Bodyweight squats are one thing, says Dagher, who says that, with the right adjustments, pretty much everyone can go into a deep squat. But, Somerset points out that weighted squats are a different story.

“For some people, their squats fall apart under a certain amount of loading,” he says.

You see, even if you’ve maxed out your mobility in your joints, when it comes to doing weighted squats, you may not be as comfortable—or as powerful—at the deeper end of the squat as you’d like, says Dagher.

Why? It comes down to simple genetics. Some people are built with better squatting hips than others.

Quick anatomy lesson: The place where the femur (the big bone in your thigh) meets your hip, called the hip socket, looks something like a spoon going into a bowl. The top of the femur (called the femoral head) neatly fits into the pelvic socket (acetabulum) and is held in place by ligaments.

Everyone’s hip sockets are different. Some of them are deeper than others. The deeper your socket, the harder it will be for you to squat, since the femur bone will hit the pelvic bone. To go back to our “spoon in bowl” analogy, the stem of the spoon (your femur) runs into the rim of the bowl (your pelvis).

People of Scottish and French heritage typically have deeper hips, according to world-renowned spine expert Stuart McGill. Meanwhile, people from the Ukraine, Poland, and Bulgaria tend to have shallower sockets that allow them to painlessly sink into the deep part of the squat.

McGill says it’s no coincidence that Eastern Europe is home to some of the best Olympic lifters in the world.

A deep hip socket has different advantages. It’s helpful for walking and standing and great at producing rotational power (the type of force you need to hit a baseball or swing a golf club). And having deeper hip sockets doesn’t necessarily mean you can’t squat deep. But, it does mean you’ll have to work harder on the move—and may feel pain when you perform it.

The Squat Form Test

There’s a simple way to gauge the depth of your hip sockets. Simply get onto your hands and knees in an all-fours position, engage your core, and slowly rock your hips back toward your heels. You can see Dr. McGill explain how to do the move at the 2:50 mark of this video (although the entire clip is worth a watch if you have the time).

While it’d be great if you too could do the move under the guidance of the world’s leading researcher on spinal health and performance, you can do this assessment on your own. Simply set up your smartphone to your side, hit record, and do the move.

As your hips lower, you may reach a point where your lower back starts to round. The technical term for that is “spinal flexion.” When it happens while you’re squatting with a barbell on your back, the position is known by the delightful name “buttwink.”

Fun as that word may be to say out loud, buttwink while squatting under load can be bad news. “That’s when your hips stop moving and your start compensating with your back instead,” says Dagher. Disc injuries or even fractures of the spine can result.

How Deep Should You Squat?

The buttwink is why you should not view the weighted deep squat as something you must perform.

As McGill says, a lot of great ATG squatters “chose their parents wisely.”

“The extreme amount that I see people deep squatting is just unprecedented,” McGill says. “The risk is greater than is justified by the reward. No one is going to give you an extra million dollars for squatting deeper. If you need to do that for competition, then that’s one thing. But if your objective is health, then it’s pretty hard to justify.”

The same isn’t true for deep bodyweight squats, however. “Buttwink here is not an issue,” Dagher says. Go ahead and wink away when you’re working the deep squat without weight with the goal of improving your mobility and comfort in the squat.

But, where your back begins to go into flexion when you’re doing the all-fours test, that’s where you’d want your descent to stop if you were performing weighted back squat. If that means you can only squat as low as a box, no problem. 

If the box isn’t high enough, you can take a cue from Jim Smith, C.P.P.S, and stack mats on top of the box until you reach the right height. As your mobility and ability to squat lower improve over time, you can pull mats off the pile. No matter what height you reach, Somerset says your main objective should be one thing: control.  

A deep range of motion isn’t meant for everyone, so don’t overthink your squat form. In fact, for many people, trying to reach more depth can be counterproductive–or even dangerous. And for no reason.

Less depth doesn’t mean less strength or muscle. But, it also doesn’t mean creating such a short range of motion (like moving 2 inches, so it looks like you’re bouncing up and down) that you’re not creating tension in the muscles, challenging your body, or doing the exercise in a controlled manner. That’s just called cheating.

“Keeping the squat controlled is more important than the depth or the amount of weight being used,” says Somerset.

Hit the height that’s right for you, with the stance that’s right for you, using a weight that you can manage. And then work the deep bodyweight squat. You’ll soon find that you’ll improve your squat form, will move better, and you will become a lot stronger, too.

READ MORE: 

Why Do Squats Hurt? (And How to Fix the Problems)

6 Exercise Upgrades for Better Results

The Tension Weightlifting Technique: How to Make Every Exercise More Effective

Adam Bornstein

Adam Bornstein is a New York Times bestselling author and the author of You Can’t Screw This Up. He is the founder of Born Fitness, and the co-founder of Arnold’s Pump Club (with Arnold Schwarzenegger) and Pen Name Consulting. An award-winning writer and editor, Bornstein was previously the Chief Nutrition Officer for Ladder, the Fitness and Nutrition editor for Men’s Health, Editorial Director at LIVESTRONG.com, and a columnist for SHAPE, Men’s Fitness, and Muscle & Fitness. He’s also a nutrition and fitness advisor for LeBron James, Cindy Crawford, Lindsey Vonn, and Arnold Schwarzenegger. According to The Huffington Post, Bornstein is “one of the most inspiring sources in all of health and fitness.” His work has been featured in dozens of publications, including The New York Times, Fast Company, ESPN, and GQ, and he’s appeared on Good Morning America, The Today Show, and E! News.

The post The Mystery of Squat Form: How Low Should You Go, Really?   appeared first on Born Fitness.

Your arms and back have to do an enormous amount of work to lift your entire body, which is why being able to perform many reps is an effective way to improve not just the obvious muscles — your back, arms and forearms — but can also help you build incredible core strength.

In fact, as an exercise physiologist and strength coach, I’d go so far as to say that the pull-up is the world’s most under-appreciated way to develop your abs—and every other muscle in your midsection, for that matter.

All of that is great, but there’s one problem: It’s an exercise that gives a lot of people a lot of trouble, regardless of whether you’ve been training for years or just started.

If you are struggling to perform a pull-up — or you wish you could do many more — I’ll share a few simple-to-learn techniques that aren’t taught enough and will change everything about your pull-up performance.

By the time you’re done, you’ll not only be surprised by how quickly you can improve, but also by how many of the methods used to increase your upper body strength aren’t actually pull-ups.

Can’t Do a Pull-up? Start Here

If you can’t do any pull-ups, odds are you’ll blame it on your lack of back strength. To become stronger, you might start doing countless 1-arm rows and other dumbbell or barbell exercises.

While those exercise will make you stronger (and are a part of the solution), they won’t guarantee that you’ll be able to do more pull-ups. That’s because pull-ups aren’t just about your back.

Even if you have a really strong back, you can struggle with pull-ups if you have a weak core.

Core stiffness, or being able to create tension throughout your torso, is a key part of successfully doing a pull-up.

Your shoulder blades are connected to your torso. A stiff, stable core gives your arms something strong to pull on. And that can have a massive impact on your ability to lift your body.

So if you are struggling with your pull-ups—or can’t do a pull-up at all—train your core with these moves.

(If you prefer to watch all tips, here’s a video breaking down a lot of the progressions we’ll discuss today. In it, you’ll see my friend and fellow coach Tony Gentilcore demonstrating a lot of the moves discussed here.)

Hollow Body Holds

Start by lying on the floor. Lift your arms overhead (biceps in line with your ears), keeping your elbows straight.

Cross your hands and your ankles. Then press your hands and ankles into each other to create tension, and lift up into the hollow body position.

Let’s talk about that term “hollow” for a second. You might hear it and think: “belly button to spine.” DON’T DO THAT.

In a good hollow position, your abs are securely braced, as if they were about to take a punch. Take a breath in and squeeze. If anything, your abs will move slightly outward.

Start by holding a hollow body position while pressing your hands into each other and pressing your ankles into each other. This builds some of the body tension related to the position of hanging from a bar.

Hold this position for 5 seconds or 2-3 breaths per rep, maintaining as much head-to-toe tension as you can (more on how to create tension). Take a 5-second break, then repeat for 5-6 reps per set. Over time, you can increase the duration of your holds. If you can maintain tension for a full minute, that’s really good.

Hollow Body Horizontal Pull-ups

Next, you’re going to use a dowel or broomstick. Hold it in both hands as if it were the pull-up bar.

Start with your arms straight and elbows locked out, as if you were hanging from a pull-up bar. Then, while you hold the hollow position, bend your elbows to pull the bar across your face and toward your chest line, mimicking the pull-up movement.

The goal here is to maintain the core strength requirement while including an arm movement that replicates the pull-up—all while trying to breathe.

Hold the hollow body and try to complete 8-10 reps, breathing out as the bar comes to your collarbone.

Hollow Body Leg Raises

Are you a boss at the hollow body work? Great! Then it’s time to take it up another notch.

You can create some additional arm stimulus, and increase the challenge to your core, by doing a leg raise. Keep both knees locked out and cross one foot over the other. Pull down on the stick and lift your toes toward it. You may even be able to touch your toes to the bar, depending on your level of strength and control.

The big thing to remember here is to maintain tension throughout your lats to help pull your torso up. Squeeze the bar as hard as you can in your hands and think about pulling down on the bar as much as you are pulling up with your legs. This tension in your arms, back and core will help you lift your legs more easily.

Perform a set of 5-8 reps.

Stability Ball Rollouts

Another exercise that develops core stiffness is a stability ball rollout. There are two ways you can perform the movement, and both are helpful to your pull-up quest.

Option #1: Try to keep your abs tensed and press your hips forward, allowing your arms to extend out as you move. Then pull back with your hips.  This version will place more emphasis on your abs and lower back, while taking some of the work off of your shoulders

Option #2: Do the same thing as you did in option #1, but use your lats to try and pull the ball back with your elbows to return to the starting position. In this version the shoulder angle is changing, which means the muscles that control the shoulders will be under greater load.

Complete 5-10 reps of either option, or both if you’re a little crazy.

How to Build Strength on the Pull-up Bar

Before you start pulling, it’s helpful to build your skill hanging from the bar.

Bar Hang

You might struggle at maintaining a dead hang from the bar due to grip strength. Hanging for 10-30 seconds can be a simple and very effective way to build the grip strength needed to perform pull-ups.

Hanging Shoulder Shrugs

When you can conquer that challenge with ease, your next goal is pulling your shoulders down and tight to your ribs while holding the same hollow body position you used on the ground.

Hold that position for 5 seconds per rep, breathing out forcefully with each contraction.

Hanging Leg Raises

Have the hollow body hang down cold? Good. You can add in some leg raises to really take it up a notch.

Start with a bent knee leg raise. The key is to not sway.

If that’s no problem, try a straight leg raise. Again, you want to avoid rocking back and forth. The movement should be slow and controlled.

In all likelihood, you will find at least one of these moves challenging. Because your goal with these is quality, not quantity, you can use “micro sets” to accumulate volume. Try to hit 10 amazingly good reps total. To do that, you might need to perform 5 sets of 2, or 4 sets of 2-to-3, or 3 sets of 3, and so on.

If you wanted to get a little crazy, you could try to bring your toes to the bar. Use your arms to help pull-up on your torso to get a more horizontal angle on the movement.

Pull-up Training: Mastering the Movement

Now let’s “grease the groove” of the movement in a way that will help you develop strength if you’re a beginner, and provide value if you’re more advanced.

Flexed Arm Hang

The flexed arm hang is a simple, yet underutilized move that will have all the muscles in your back and arms firing hard.  

To perform the move, just grab the bar and jump up. Keeping your chest as close to the bar as possible, hang there as long as you can tolerate. When you start to feel yourself coming down, fight the lowering for 3-5 seconds so you can get some eccentric strength development out of the move.

Try to maintain 10 to 30 seconds per hold, accumulating up to 30 seconds in a workout.  For eccentric reps, try to keep it to a max of 5 reps of 3-5 second eccentric lowering unless you want to look like a T-Rex for a few days after your workout because you’re too sore to extend your elbows.

Band Assisted Pull-ups

Once you are able to do flexed arm hangs (and the 3-5 second lowering) with skill and control, you should be ready to try the pull-up.

If you want to ease yourself into the movement, start by using a band for assistance.

The thicker the band, the more assistance it provides. Similarly, placing two feet in the band versus just one gives you more help when you perform the move.

Start with the thickest band you need in order to execute the move, then work down to smaller, thinner bands over time.

(More ways to use resistance bands in your workouts here.)

The “Pernicious Pull-up Power” Workout Routine

So how do you put all of this together into a realistic pull-up training plan you could use on a regular basis? Glad you asked.

You want to “train for the movement” frequently. Three to four times a week is ideal.

Notice I said “train for the movement” and not “train the movement itself.” That’s because not all of your sessions need to include pull-ups. In fact, you’ll only perform actual pull-ups one day per week on this plan.

Here’s a sample calendar of what this pull-up training plan looks like:

DAY 1

Hollow Body Holds – 4 sets x 5 reps/set x 5 second hold per rep

Bar Hangs – 4 x sets x 6 reps/set x 5 second hold per rep

Flexed Arm Hang – accumulate 30 seconds

DAY 2

Hanging Shoulder Shrugs – 4 sets x 5 reps/set x 5 second hold per rep

Hollow Body Horizontal pull-ups – 4 sets x 8-10 reps/set

Hanging Leg Raises – 10 total reps

DAY 3

Hollow Body Leg Raises – 4 sets x 5-8 reps of smooth controlled tension

Eccentric pull-ups – 4 x sets of 4-5 reps working on 3-5 second eccentrics

DAY 4 (Pull-up day!) 

**If you can’t do a pull-up, perform…

Band Assisted Pull-ups – aim for a max of 3 reps per set

** If you can do pull-ups, then….

Pull-ups – start with a single max set, then perform 3 sets of 50% of this number. For instance, if you do 6 on the first set, do 3 sets of 3.

Following this pattern will help you develop pull-up specific strength in your back and arms and the core stiffness needed to accomplish the movement. Since there are a max of three moves per session, you can combine this simple calendar with your current training program.

Pull-ups may never be easy. But by training for them specifically, you’ll soon be able to do a lot more than you think.

READ MORE: 

The Fastest Way to Do More Pushups

The Tension Weightlifting Technique: How to Make Every Exercise More Effective

Do Carbs Actually Make You Fat?

Dean Somerset is a kinesiologist, strength coach, author and public speaker who specializes in injury and medical dysfunction management through exercise program design. The seriously in-depth “The Complete Shoulder & Hip Blueprint,” which Somerset and Tony Gentilcore teamed up to create, is available now. Born Fitness is not an affiliate and has no financial stake or interest in the product, but we do genuinely think Dean and Tony are rad, and are way better at pull-ups thanks to their knowledge.      

The post How Anyone Can Master the Pull-up appeared first on Born Fitness.

Many exercise programs place you — and your body — in positions that leave you vulnerable.

That’s not to say you should never squat with a barbell on your back, perform deadlifts, or do a variety of other exercises.

But, it does mean that recognizing when you are at risk — and how to avoid putting yourself in a position to get hurt — are the first steps of assessing whether a program is right for you. After all, if you can stay healthy and exercise consistently, you will see results.

Before you start another workout, let these tips be your guide to staying healthy, picking the right moves for you, and progressing to the more intimidating when they no longer feel like a challenge.

The Revolving Door of Pain

There are really only two ways you could hurt yourself in the gym. Call them “Whoops!” and “Wearing Down.”

“Whoops!” refers to times when you do something like drop a dumbbell on your foot and break your toes (not that it would ever happen to you). If you dive into the data, you’ll see these events are breathtakingly rare.

Research published in The American Journal of Sports Medicine found that just of 0.2 percent of lifters were admitted to emergency departments—over the span of 18 years. Four times more people wind up in emergency rooms due to bathroom-related injuries every year. Seriously.

You’re far more likely to wind up in AN EMERGENCY ROOM due to a “bathroom-related injury” than you are from lifting. Weightlifting is a tremendously safe activity.

Bottom line: Weightlifting is surprisingly safe, so you don’t need to spend much time worrying about “whoops!” events.

The real danger — the revolving door of injury — is by “wearing down” — and it can oftentimes be prevented.

Wearing Down refers to those times when a move just feels…not quite right. Like when you perform an overhead press and your shoulder says, “stop!” Or when your elbows hurt when you bench. Or when you finish a set of squats or deadlifts and it feels like your lower back got more of a workout than your legs.

These pains can start out subtle and may seem like no big deal, but they can grow into something serious (think: strains, sprains or tendinitis) over time. So it’s important to tune in to these cues. Then you can address them before they become full-blown issues.

“The vast majority of strength-training related injuries are due to overuse or poor technique, and can build up over time into more serious problems,” explains California-based exercise physiologist Pete McCall, M.S., C.S.C.S., C.P.T.

The good news? “Wearing Down” injuries are entirely preventable. Rather than muscling through those times when your body sends you a warning shot, you can identify what they are trying to tell you. Then you can correct the problem.

Or, in some cases, knowing that there are different variations of an exercise can help you avoid pain in the first place. You wouldn’t do algebra before you could add, so why are you doing complex lifts before you master the basics?

Here, McCall and other top strength coaches share the most common causes of weight-room pain for each of the four major movement patterns—squats (or “knee-dominant” moves), hinges (“hip dominant” moves like deadlifts), push exercises, and pull exercises—and explain what’s happening. Follow their advice and you’ll ensure that the lifts you perform do what they’re meant to do: Build you up and make you stronger.

Knee-Dominant Exercises: Squats, Step-ups and Lunges

What you feel: Knee pain (especially around the kneecap), low back pain

What’s causing the problem: “Most knee injuries for knee-dominant moves stem from improper tracking of the knee joint,” explains Mathew Kite, C.S.C.S., an exercise scientist and general manager of D1 Sports Training in Dallas, Texas. Basically, your knee should go in one direction, but winds up going in another instead.

In the case of the squat, your knees collapse inward, a position called valgus. Valgus knees place damaging side-to-side stress on your joint, particularly on your patellar tendon.

Worst of all? “Going valgus” isn’t your knees’ fault. The real culprit is a set of weak glutes.

When your glutes aren’t as strong as they need to be to handle the load on your back, your knees automatically fall inward in order to help you lift the weight. This is okay if it were to happen only occasionally, like on the last rep of your last set while setting a new max. (You’ll see some powerlifters’ knees go inward onsets when they’re really going for broke.) But other than that, you don’t want this to happen.

Making matters worse, having weak glutes can cause you to lean too far forward when you squat. While a little bit of a forward lean is OK, having too much of one can put excess pressure on your lower back.

There’s one more thing that can cause you to lean forward excessively when you squat: poor ankle mobility. You’ll know this is your problem if you feel that it’s difficult to keep your heels on the floor as you lower your butt to the floor, McCall says.

WANT TO AVOID KNEE PAIN? DEVELOP A STRONGER BUTT.

What you can do: Your first goal is simple: “Develop a stronger butt to save your knees,” says Kite. Building up your glutes will help your knees track correctly (think of them angling toward the pinky toes when you squat or lunge). To strengthen them, try adding frog pumps, glute bridges and hip thrusts to your workouts.

If you have a bar on your back, focus on pulling it down into your traps. That will help stabilize the upper part of your torso and prevent it from tipping forward, Callaway says.

If you’re having a hard time keeping your heels on the floor, McCall recommends foam rolling, stretching, and doing mobility drills for your calves prior to squats. Try taking them through their full range of motion with toes-elevated bodyweight calf raises.

Lastly, you don’t need to squat with a barbell on your back. Goblet squats — which are typically done with a dumbbell or kettlebell — are variation that is knee and back friendly, and it makes it easier to squat without your knees collapsing or body leaning forward.

Hip-Dominant Exercises: Deadlifts, Hip Thrusts, and Glute Bridges

What you feel: Pain in your lower back (a.k.a. the lumbar spine) or neck (cervical spine).

What’s causing the problem: “An incorrect set-up,” says Meghan Callaway, CPT. “Many deadlifters set their hips too low and end up ‘squatting the deadlift’—or they set their hips too high [and wind up rounding their back in order to reach the bar]. Both can place the body at a greater risk of injury.” Having a rounded back or overly arched back stresses your spine in its weakest positions.

What you can do about it: Your goal here is to maintain what’s called a neutral spine, which has a natural (but not excessive) curve inward at the lower back, then slightly outward at the shoulder blades, and back inward at the neck.

“Maintaining a neutral spine is what’s going to keep that back healthy and ready for the next workout,” Kite says.

To achieve this when you perform a hinge-style movement like the deadlift, you want to think about getting as much movement as possible from your hips with as little movement as possible from your knees. Drive each rep with your hips, pushing your butt as far backwards as you can.

A good way to learn this pattern is to set a foam roller (or anything that’s straight, like a PVC pipe) against your back so that it has three points of contact with you, touching the back of your head, your shoulders, and your tailbone.

https://www.youtube.com/watch?v=_TfzOviOVes

Another way to make sure that you are running the show with your hips rather than lower back is to make sure the weight remains as close to your body as possible during deadlifts, Callaway says. When you lower the weight, image the bar almost scratching against your shins, which will help keep the bar closer to your body throughout the movement.

If deadlifts are difficult, there’s no need to pull the weight from the floor. You can place a barbell or dumbbell on boxes or platforms. What this does is limit the range of motion to help you be in a position of power.

That way, you can perfect the movement without getting into a position where you are overly rounded. As you can stronger and better, you can lower the boxes — or, you might find that you never need to pull the weight from the floor. Unless you’re an Olympic lifter, there’s no reason to hold to this belief unnecessarily.

Or, you can do a staggered stance deadlift. The joy of this variation is that it provides the benefits of a single-leg deadlift (where less weight is needed), without the advanced difficulty of balance. The back leg works like a kickstand to make it easier to move in a way that doesn’t make your body vulnerable to injury.

“Push” Exercises: Bench Press Variations, Push-ups, Shoulder Presses, Triceps Extensions

What you feel: Shoulder pain, elbow strain, wrist discomfort.

What’s causing the problem: Not keeping the wrist, elbow, and shoulder stacked during bench and shoulder presses can also introduce instability in the shoulder joint, Kite says. Bending your wrists can also introduce pain.

What you can do about it:  Think tight, tight, tight—all of the way from your wrists to your core.

To get your wrists in order, you need to start by gripping the bar correctly. Here’s an instance where what “feels” natural—and what most people do—is actually wrong.

Watch Starting Strength author Mark Rippetoe explain how to properly grip the bar for a press starting at 1:57 in this video. Note that the process depends you placing your palms on the bar first, rather than wrapping with your knuckles first. Properly placing the bar across your palms will stack the weight on the bones of your forearm, making for a more powerful (and far less injury-prone) press.

From there, you’ll want to keep your core muscles engaged, obliques braced, and rib cage down (no flaring!). “This will help prevent the spine from hyperextending,” says Callaway. She adds that if you can’t press a weight while keeping a natural curve in your spine, you need to decrease weight. It also wouldn’t hurt to build your core strength with the help of exercises like the dead bug and Pallof press.

Still concerned about pressing? For one, barbells are not necessary. You can challenge your muscle just fine with dumbbell variations or even bands or cables. If your shoulders are vulnerable with the bench press, try a floor press, instead, which will limit the range of motion. Worried about overhead pressing? If you have a landmine (or you can just place a barbell in the corner of a room), try this press variation, which is easier on your shoulders and elbows.

“Pull” Exercises: Rows, Pull-ups, Face-pulls, Biceps curls

What you feel: Shoulder pain, wrist discomfort, tennis elbow

What’s causing the problem: “Not controlling the lowering (eccentric) part of the lift,” Callaway says.

Many people put their body at risk by not controlling the lowering phase of the pull-up. If you are allowing your body to free-fall from the top position, that could be part of your problem. Doing so exerts additional force on the joints from your shoulder blades, shoulder, elbows, and wrists. The effect can hold true when you’re doing biceps curls, rows, and any other “pulling” exercise.

What you can do about it: Start by using lighter weights. If you can’t control a weight both up and down, you’re just asking for injury. In general, if you can’t control the weight for 2-3 seconds on the descent, the weight is probably too heavy.

Next, if you know that lowering the weight can lead to injury, it only makes sense to emphasize that type of training. Turn a weakness into a strength and you won’t get hurt. Here’s how it works: “Take three to five seconds to lower your body [from the pull-up bar] or the weight,” Callaway says. You can do this with almost any exercise. And the benefit isn’t just injury prevent; research shows that focusing on the eccentric can cause more of the good “microtears” that helps your muscles become bigger.

With each rep, pretend that you are pinching and slowly releasing an orange from between your shoulder blades. Then, keep your entire body tight and braced to keep your body in a more stable position and prevent swinging (ak.ka. don’t kip). Engaging your core properly will be especially helpful on “hanging” moves like pull-ups. Tony Gentilcore, C.S.C.S., explains the proper way to set up for these moves in this short video:

While pullups are an effective exercise, they’re not necessary. For bodyweight pulling, you can do inverted or bodyweight rows. The closer your body is to parallel to the floor, the harder the movement becomes.

Also, if you’ve experienced elbow pain (or something like tennis elbow) in the past, McCall recommends try performing some or all of your pulling exercises with a palms-up (supinated) grip or with your palms facing each other (neutral grip). The rotation of your palm changes the stress you put on your shoulders, and, therefore, makes the movement more kind to your elbows.

READ MORE:

The End of Shoulder Pain

Why Do Squats Hurt? (And How to Fix the Problems)

The Complete Deadlift Guide

K. Aleisha Fetters, M.S., C.S.C.S., is a Chicago-based personal and online trainer. She has a graduate degree in health and science reporting from the Medill School of Journalism at Northwestern University and regularly contributes to Men’s Health, Women’s Health, SELF, U.S. News & World Report, TIME, and SHAPE. When she’s not lifting something heavy, she’s usually guzzling coffee and writing about the health benefits of doing so.

The post How to Prevent Knee, Back, and Shoulder Injuries appeared first on Born Fitness.

If you’ve ever thought about adding resistance band exercises to your routine — or are limited to working out at home and don’t have much equipment — you might be surprised by how much you can accomplish without any iron.

How Can You Use Resistance Bands in Your Workout?

Resistance bands can be used for at least four different types of exercises:

• Stretching and mobility
• Warm ups and muscle activation
• Resistance training and “getting a pump”
• Developing the “mind-muscle” connection (learning to better “feel” your muscles working)

Each of these goals require you to use the bands slightly differently, but with each example, you can accomplish quite a bit with just a few bands.

Resistance Band Stretches and Mobility Work

Resistance band stretches can help you overcome the hardest part of stretching — feeling like you are limited by the range of motion in your muscles. You know this as “feeling tight.” (A.K.A. “I’m not flexible!”). Funny as it might sound, the limitation might really be in your head, or in another part of your body.

Think about a simple hamstring stretch, where you lie on your back with one leg on the floor and raise the other leg to the sky. Most of the time you use your hands to provide resistance. Simply looping a resistance band around your ankle can create a different movement pattern (because the pressure of pulling comes at a different angle — from your ankle instead of behind your knee), which might allow you to generate more range of motion.

It’s not magic, but most people will find they can get a better stretch with the resistance band variation. That’s because a resistance band can help you go deeper into a stretch, provide support, or help reduce the load of your bodyweight when you perform a move. That’s why many trainers consider bands to be a “must” for maximizing your mobility.

There are limitless ways you can use resistance bands to assist you when you stretch. Here are two examples—one for your upper body, one for your lower body.

Banded Lat Stretch

https://youtu.be/gjRMe2Bcbu4

Loop a band around something at least 6 inches over your head, such as a pull up bar. Grab the band with one arm and step back, so that you band forms a 45- to -60 degree angle to the floor. Get into a staggered stance and put one knee on the floor. Your arm should be in a straight line and aligned with the band.

Lean forward slightly so that your torso is perfectly aligned with your arm. (It will look like the band is an extension of your arm. You could draw a straight line from your hips all the way up to the top of the band where it’s attached to the pull up bar). Hold this position so you feel a stretch in your back.

Do 5 deep breaths, inhaling through the nose and exhaling through the mouth, and then switch sides.

Band Supported Leg Lowering 

https://youtu.be/TY6RmPbKqe0

Lie flat on your back and then bring both of your legs up towards the ceiling. Your legs and body should form the shape of a “L.”

Wrap a band around the arch of one of your feet and hold it stable. Keep both of your knees locked out by squeezing your quadriceps muscles and pointing your toes towards your shins.

Lower your leg that does not have the band around it until either A) you feel tightness in your hamstring, or B) you feel pain in your back (this is bad) or don’t feel stable in your core. When either of those things happen, stop, then reverse the movement and lift the leg back up.

Ideally, you’ll take 2 seconds to lower your leg, then take 2 seconds to lift your leg back up using your core muscles. Perform 1-2 sets of 5 repetitions per leg as a part of your warmup, or pair with a lower body movement such as stiff-legged deadlifts.

Resistance Band Exercises for Muscle Activation

Resistance band exercises can be used to strengthen or activate hard-to-hit muscles. For example, your shoulders are two areas that most people have troubling “feeling.” Because of continuous tension, bands are an effective way to help activation and work those muscles without supporting muscles taking over.

Band pull-aparts are a fantastic way to warm up your shoulders. Remember how bands help create more tension throughout the movement? Tension means more blood flow. More blood flow means you’re muscles will feel warm. It’s like adding oil to a squeaky break.

When performing the movement, make sure you don’t have too much slack in the band, because if you do that takes the tension off of your shoulders. The band pull-apart is also effective because it works your shoulders in a pattern that is often overlooked.

Think about how much time you spend at your desk with your shoulders slouched. The band pull-apart works the opposite range of motion, meaning it helps pull your shoulders back into their correct alignment, improving your posture.

Better posture means less pain. And because you’re pulling the band apart, that means you have maximum tension with minimum weight. This is something that isn’t always easy with weights like dumbbells.

Band Pull-aparts 

https://youtu.be/vBhetF3Cyew

Here’s how to do it: Grip the opposite ends of a long (about 40 inches is typical) resistance band. You can mix up your hand position, from prone (thumbs facing one another) to neutral (thumbs facing the ceiling) to supinated (thumbs pointed away from one another).

Position your hands about shoulder width apart, or at a distance where you feel a little tension in the band. From there, pull your hands outward as wide as you can.

Pause and squeeze the muscles in your upper back and shoulders, then reverse directions and bring your hands back toward one another (back to the starting position), and repeat. Focus on keeping your shoulders down and back throughout the entire movement.

Perform 3 sets of 15-30 repetitions.

Mini-Band Lateral Walks

Remember how pull aparts were great for your shoulders? These lateral band walks can do the same for your glutes and help them wake up.

Place the band above your knees. Spread your legs wide enough that you feel tension across the band. (Consider this an athletic position, like a baseball player about to field a ground ball.) Take one leg and step out to the side. Then, follow with your other leg, making sure you maintain tension on the band throughout the movement.

Walk for 10-15 steps in one direction (i.e. from left to right) then switch and go for the same distance in the opposite direction (from right to left).

Goblet Squats

Place the mini-band around your legs just above the knees. Hold a dumbbell vertically against your chest with both of your hands supporting the weight underneath. Press your elbows inward against your rib cage, which activates the muscles in your upper back.

Squat down by pushing your hips back and pressing your knees outward against the mini-band. Doing so activates your glutes and helps you steer clear of knee pain. Lower yourself down until your elbows touch the insides of your knees, then press through your feet to stand back up.

Resistance Band Exercises for Building Muscle

No matter what some people might insist, weights are not the only way to build muscle. Weights are effective because they add resistance. Bands also provide resistance, meaning they also can help you build muscle.

In particular, bands might be most effective when doing higher rep training, such as performing 20 to 30 reps (or more) per set (this is known as “metabolite training”).

Research has repeatedly shown that building muscle is somewhat dependent on volume — or the number of reps x sets x weight. Because you have 3 variables you can manipulate, bands provide a way to increase volume (through more reps) without needing more weight.

This approach works for any muscle in your body — from arms and shoulders, to your chest, back and even your butt. Just ask anyone who’s ever tried Bret Contreras’s glute burnout. Here is another example of how you can use bands to achieve some metabolic glute work:

https://www.instagram.com/p/BYPHRU-B8w3/?taken-by=l2fitnessyeg

Resistance Band Exercises and the Mind-Muscle Connection

The mind-muscle connection is something that not everyone is familiar with but it can make a huge difference in your training. Basically, it’s about using your brain to drive more effort from your muscles. If that sounds a little crazy, rest assured it’s a real thing. (Here’s proof.) And with the help of resistance bands, you can develop it.

Resistance bands are useful way to build that connection because the farther you pull the band and the more it lengthens, the harder your muscles have to work.

The increased tension provides a strong peak contraction at the top of every rep. You’ll really feel those muscles working. Want to take it up another notch? Add in a pause at the top. (Ooh, it burns!)

What are the Limits of Resistance Bands?

Like anything, there are always some limitations. For instance, resistance bands don’t necessarily challenge your muscles through a full range of motion.

Lifting weights consists of a raising portion (the concentric) and a lowering portion (the eccentric). The eccentric phase of a lift is the part where you are lowering the weight back down, and it’s beneficial for both muscle growth and improving muscle control.

They feel lighter on your muscles as the bands themselves get shorter. As we discussed above, that may be great from an injury prevention standpoint. But since eccentric muscle actions are where we elicit the most muscle damage in training, using bands alone might limit the amount muscle you can build.

Bands can also make measuring your resistance a little tricky. Part of adding muscle is creating a challenge for your muscles. That’s why bands work — they add resistance. At some point, however, your body will adapt to resistance. This is why you might stop seeing results. Your body adapts, and you need to keep creating a new challenge in order to fight off plateau.

There are many ways to do steer clear of plateaus, however. You can make an exercise more challenging (if you are doing band rows with both arms, you can switch to a 1-arm version with the same band, which will make it more difficult), or you can add weight. This is where dumbbells and barbells have an obvious advantage, as you can just use bigger weights.

But don’t stress too much. Your hand placement, the distance between you and where the band is anchored, and how far the band is stretched can all be used to increase or decrease the resistance. You can also user thicker bands (which has more resistance) or even add multiple bands.

At some point — yes — you might need to add more weight to create a bigger challenge. But as long as you continue to find ways to challenge your muscles (which can also occur by doing more reps and/or sets of an exercise), your resistance band workout will keep delivering results.

The Resistance Band Workout for Building Muscle

Want to give resistance band exercises a try? Here’s a sample upper and lower body workout designed for building muscle.

Upper Body Resistance Band Workout
1) Band pull-aparts: 4 x 15-20 reps x 60s rest
2A) Band pushups: 3 x 10-20 x 45s
2B) Band 2-arm rows: 3 x 15-20 x 45s
3A) 1-arm band row: 3 x 8-15/arm x 45s
3B) 1-arm band chest press: 3 x 8-12/arm x 45s
4A) Band overhead triceps extension – 3 x 12-20 x 45s
4B) Band biceps curls – 3 x 12-15 x 45s

Lower body Resistance Band Workout
1) Mini-band lateral walks: 4 x 15-20/side x 60 seconds
2) Band leg curl: 3 x 15-20 x 60s
3) Rear foot elevated split squat (can add band for resistance): 4 x 12-15 x 60s
4A) Band good morning: 3 x 20-25 x 60s
4B) Walking lunges: 3 x 10-15/leg x 60s
5) Band iso hold Pallof press: 4 x 30s/side x 60s

READ MORE: 

How to Build the Perfect Bodyweight Workout

How to Master the Art of Old School Muscle Building

The Tension Weightlifting Technique: How to Make Every Exercise More Effective

References

1. Pull, Ranson (2007) Eccentric muscle actions: Implications for injury prevention and rehabilitation.


2. Schoenfeld BJ (2010) The mechanisms of muscle hypertrophy and their application to resistance training.


3. Schoenfeld BJ, Grgic J, Ogborn D, Krieger JW (2017) Strength and Hypertrophy Adaptations Between Low- vs. High-Load Resistance Training: A Systematic Review and Meta-analysis.


Landon Poburan is the owner of L2 Fitness in Edmonton, Canada. The L2 Fitness Summit is a video series that includes 11+ hours of muscle building ideas from our friends Dr. Mike Israetel and Dean Somerset. If you’re a coach, or just super into getting swole (Israetel) while staying awesomely mobile and balanced (Somerset), then you may seriously enjoy this product, which is on sale for $50 off through December 10th at midnight. And coaches: You get CEUs! Full disclosure: We here at Born Fitness get absolutely nothing for telling you about this product — we are not affiliates and have no financial stake involved. 

Landon Poburan

Personal trainer, nutrition coach and owner of L2 Fitness located in Edmonton, AB Canada.

l2fitness.com/

The post How to Use Resistance Band Exercises in Your Workouts appeared first on Born Fitness.

And if you already perform and love the deadlift, you can spend the same 3 minutes reading and learning why the exercise is even better than you thought. Or you can skip on ahead to the deadlift form guide. Your call.

Ready? Let’s set a timer for 3 minutes…

Reason to Deadlift #1: You’re going to get way stronger—and therefore live longer.

The deadlift is a true total body exercise that builds full body strength (both your lower and upper body will benefit). And getting stronger is NEVER a bad thing.

In fact, getting stronger is far better for you than you may think. Researchers have found a correlation between grip strength and mortality, as in those with stronger grips tend to live longer. And one thing you will definitely get from deadlifting is a strong grip.

(Not to mention stronger quadriceps, hamstrings, forearms, traps, and glutes, just to name a few.)

Reason to Deadlift  #2: That strength will come in handy throughout your (now longer) life.

There are two types of people in the world: Those who struggle to move a couch, and those who deadlift.

But let’s say you never move couches. At some point or another, you’re going to need to pick something up off of the ground. When you do, you’ll be far better suited to do so because you deadlift.

The deadlift takes a basic human movement (picking something up) and makes you far more capable at it. That means you’ll be far less likely to get hurt.

In fact….

Reason to Deadlift #3: Deadlifts actually protect you from lower back pain.

How many people do you know who complain about back pain?

That’s right, seemingly everybody.

A review of 28 studies found that, from age 30 onward, the percentage of people within an age group who are dealing with chronic low back pain increases with each passing year.

So here you are, avoiding deadlifts to save your back, but yet you still have lower back pain.

Why? Probably because you’ve been avoiding deadlifts in the first place.

Don’t believe us? Consider that studies indicate that properly training the deadlift can outright fix low back pain.

How? By strengthening the spinal erectors, or the muscles that maintain the integrity of the spine. They travel the entire length of your spine, tucking under the lats and traps, and running all the way down to your lower back.

According to research, the deadlift trains this musculature better than anything. Two studies looked at spinal erector activation during the deadlift, and found that the exercise induced high amounts of upper spinal erector activity in a way not seen with other exercises.

The studies also showed strengthening in the lower back.

“But wait,” you say. “I’m not really ‘into’ weight training.”

That’s cool. And completely understandable. But before you say that weights aren’t for you, let’s just make sure you understand a few other things here…

Reason to Deadlift #4: Weight training helps you lose—and keep off—fat.

The stronger you are, the more lean body mass you carry.

The more lean body mass you carry, the higher your basal metabolic rate. That’s the number of calories your body burns on it’s own just to keep you alive—before factoring in things exercise and NEAT.

One study found that men who weight trained burned 350 more calories on average while just sitting around and watching television.

Some claim that it takes years of lifting weights to achieve this effect, but research shows otherwise. One study found that just 16 weeks of strength training produced a noticeable lift in the resting metabolic rate of a group of men aged 50-65.

And while people often think that cardio is king for keeping fat off (total myth, BTW), researchers who ran a cohort that encompassed more than 10,500 men across 12 years found that those who lifted weight gained less fat over the long haul.

Reason to Deadlift #5: Weight training improves other aspects of your health, too.

For example, one study found that muscle mass was inherently protective against diabetes.

Muscle also plays a crucial role if you ever have to recover from surgery or serious illness.

We could go on, but you get the point: Being strong is good. Having muscle is good. And deadlifts will help you build plenty of it.

That was a fun 3 minutes, right? We thought so too. Well, now that you know the value of deadlifts, let’s show you how to do them properly so you never fear them again…

Proper Deadlift Form: How to Fit the Move to Your Body Type

Maybe you’ve tried deadlifting in the past and thought the exercise just didn’t feel right. If so, you’re not alone.

The deadlift involves many muscles, all of your limbs, and every load-bearing joint (ankles, knees, hips and shoulders) in your body. There are a lot of variables at play. So having hard-and-fast rules about deadlift form is nearly impossible.

Your body is your body. That seems like an obvious fact, yet it’s one that’s often overlooked when it comes to form.

For example, two people who are the same height may have totally different torso and femur lengths.

Strength coach Bret Contreras does an excellent job of explaining that these different bone structures will result in totally different squat forms. The same is true for the deadlift.

A person who has a short torso and long femurs will have a more hip-dominant pull, meaning that their butt will be higher in the air and most of the force will come from their glutes and hamstrings.

Meanwhile, a person who has a long torso and short femurs would be able to get lower and involve their quads a bit more.

Reading this right now, you’re probably thinking, “How do I know whether I have a short or long torso?”

Glad you asked. There’s actually a relatively simple way to tell.

The technique can also tell you whether you’re better off using a sumo deadlift (very wide stance) rather than a traditional deadlift (where your feet are roughly hip-width apart) stance. (For more discussion about the pros and cons of each, see the section on “Stance” below.)

You’re going to need a measuring tape. Any standard one will do.

Measure the distance from the bony part of your hip to the floor. That’s your leg length.

Then measure from the same point on your hip to the top of your head. That’s your torso length.

Lastly, measure from the top of your shoulder to the tip of your middle finger. That’s your arm length.

Divide each of those numbers by your total height in inches. Then check the numbers against this table:

Your percentages will tell you whether you have a short, long or average-length torso. Same for your arms. (We can disregard your legs, since they are essentially the opposite of your torso — i.e. if the torso is long, your legs will be short.).

Those two pieces of information can tell you whether a conventional deadlift or sumo deadlift will likely feel better for you (note: no matter what the chart says, you can always go by “feel”):

Both of those tables are from Professor Michael Hales’ excellent paper “Improving The Deadlift: Understanding Constraints and Physiological Adaptations to Resistance Exercise.” And he’s the first to state that they are not the be-all, end-all. They are merely lifting recommendations based on your body’s structure.

Other factors like strength and flexibility will also come into play. But this should help you see which approach should feel better based on what your momma gave you.

Keep in mind, this does not mean you have to “only” do conventional-style or sumo-style deadlifts forever. In fact, Hales and nearly everyone else worth their salt will recommend that you switch between the two styles occasionally.

Conventional and sumo work your muscles slightly differently (conventional requires more hip drive, while sumo involves the upper legs a little more), so using both can develop a more well-rounded base of strength.

Deadlift Form: Follow these guidelines before you pull

#1. Your stance

Conventional Deadlift Foot Placement: You can start with your feet shoulder-width apart. If you’re not sure where this is, try this: Jump in the air 2-3 times. Where your feet land naturally is the proper stance for the conventional deadlift. Your toes should point forward or outward slightly.

Sumo Deadlift Foot Placement: You can try out two different starting positions.

• Option #1: Place your feet as wide as possible, meaning your toes are nearly flush against the weight plates. Many successful sumo deadlifters pull from this position. But one obvious drawback here is the risk of dropping the weight onto your toes. So be careful.
• Option #2: Widen your feet as far as you can while still being able to keep your shins vertical when you lower yourself to grip the bar. The wider your stance is, the more your feet should point outward

One last note about where to stand. Set up so that the bar is about an inch to an inch-and-a-half from your shins. When you look down at the bar, it should be positioned right about the middle of your foot, blocking the laces of your shoes from view.

#2. Your grip

Figuring out where to place your hands is quite simple. Just take a shoulder-width grip.

Choosing how to grip the bar is a little more complicated, and may change throughout your workout. There are three main options:

https://www.instagram.com/p/BWeS2EhF-_y/?taken-by=wilfredofitness

• Option #1: The double-overhand grip. This is the “best” grip most of the time. As you increase the amount of weight you can deadlift, you’ll eventually reach a weight where your grip strength becomes an issue. That’s when mixed grip comes in…
• Option #2: The mixed grip. Also known as “one overhand, one underhand” grip, this style allows you to pull heavier weights more easily. “Anybody who has trained the deadlift for a few months has had the experience of pulling on a weight that seemed too heavy even to break off the ground when tried with a double-overhand grip, only to find that it goes up surprisingly easy when the grip is alternated,” writes Mark Rippetoe in Starting Strength: Basic Barbell Training.There are some drawbacks to the mixed grip, however. Research shows that the bicep activity in the supinated (underhand grip) arm is much higher during this lift. Over time, that could create muscle imbalances, so it’s a good idea to switch which arm is overhand from set-to-set or workout-to-workout.
• Option #3: The hook grip. This grip is not very popular and for good reason—it hurts, but it’s not without benefits. The idea behind the hook grip is that you can use more weight than a double-overhand grip, since your thumbs act as hooks for the bar. But here’s the thing: Much of the weight ends up pulling on your thumbs. The stress this places on the tissue, bones, and joints of your thumbs does not feel good. One way people attempt to eliminate the grip problem altogether is to use straps.

Our suggestion would be to train without straps, with a double-overhand grip, for as many sets as possible. When you get heavy, use a mixed grip and vary which hand is over. If, after switching to a mixed grip, you still can’t hold the weight, then use straps to continue deadlifting heavy and train your grip with other exercises (farmer’s carries and suitcase deadlifts are two good options).

What to Do When You’re Ready to Lift the Weight

Ok, you’ve placed your feet and gripped the bar. It’s almost go time. Here are five things to check before you rip that sucker off the floor.

#1: Your Head

Where it goes wrong: You know that whole “look to the sky” cue? Don’t do that. Looking upward extends your neck, which is a great way to give yourself a neck strain.

How to get it right: Keep a level head position and a neutral gaze. Your chin should stay tucked. Think “tall through the back of your head.” Or, just think about creating a “double chin.” Maintain that position by looking straight ahead, rather than up, through the entire lift.

#2: Your Shoulders

Where it goes wrong: There are two potential problems here. First is the “Whoops, I rolled my shoulders forward in order to grab the bar” issue. This sets you up to pull like Quasimodo—and you don’t want to do anything in the gym looking like a hunchback. The other is the “I just wasn’t paying attention to my shoulders at all” issue. This one often winds up going Quasimodo-like as well, especially if you’re using heavy weight.

How to get it right: Pull your shoulders in and hold them tight to your sides. “Squeeze your armpits as if you had oranges in them and were trying to make juice,” is a cue we love from the always-clever Tony Gentilcore that achieves this. By pulling your shoulder blades down and in (think squeezing a pencil between your shoulder blades), you decrease the distance between your shoulders and hips, which will help you move more weight more efficiently. Plus, you’re getting your lats more involved, which will help prevent rounding.

#3: Your Legs

Where it goes wrong: Some people just bend over and grab the bar without putting any tension on the muscles they’re trying to work. While you can get away with this, it won’t put you in a position to pull the most weight, or pull it effectively. There is a better way.

How to get it right: Standing at the bar, hinge at the hips by pushing them backwards (imagine you have to open a door with your butt and you can’t use your hands). You should quickly feel tension running up the back of your legs and into your glutes. That’s a good thing. Once you feel that tension, maintain it while bending the knees just enough so that your hands can reach the bar.

#4: Your Core

Where it goes wrong: Pulling without breathing in first. What’s wrong with that?

Think of a soda can. When it’s full and sealed, it can support a ton of weight no problem. But once it’s opened and all of that pressure is released, the same weight will crumple it with ease.

A big breath in creates intra-abdominal pressure. That pressure will make you more stable, protect your spine, and help you lift far more weight.

How to get it right: Step up to the bar and get into position. Take a big breath in. As you inhale, push the air down and out to fill your abdomen. This is important: you’re not filling your chest with air (think about how you react when you’re out of breath); instead, you want to fill your belly.

Engage your core to hold your breath in that position, then lift. Keep that breath held throughout the rep, from the floor, up to lockout, and back down to the floor. Take a new breath in before every rep.

#5: Your Hands and Arms

Where it goes wrong: Gripping the bar loosely, or just pulling the bar without taking the slack out first.

How to get it right: First, when it comes to grip, grab ahold of that bar like you mean it. Regardless of which type of grip you chose, you should be gripping the bar as hard as you can.

Next, pull the slack out of the bar. What does that mean? When you grip, don’t just try to crush the bar into dust, also pull it apart.

Now, it’s go time.

Executing the Deadlift

You really only need to think about two things when you pull the bar:

1. Push off the floor
2. Keep everything tight (especially your core and lats)

During a conventional deadlift, if you are thinking about “pushing the floor away,” it will help you generate tension throughout your hips and knees.

If you’re doing a sumo deadlift, it may be helpful to think of this as “spreading the floor,” since that means pushing outwards on the sides of your feet.

In either case, the goal is the same: to generate tension through your knees and hips.

Keeping your core, arms, and lats engaged will help you avoid what you might call the Angry Cat Deadlift.

In an Angry Cat Deadlift, the lats aren’t activated enough, or the person’s core isn’t sufficiently braced, and the first thing that comes up is their lumbar spine.

If your lats are engaged and your core is firmly braced, then you probably won’t run into this problem. However, if you do feel your lower back rounding, it’s a sign that you’re using too much weight. Lower the load, work at a resistance that doesn’t cause you to go cat-like, and build up over time.

When you reach the top of the rep, known as lockout, pay attention.

Some people seem to think that “locking out” means “leaning back,” but nothing could be further from the truth. Doing that hyperextends your knees and spine, which can compress those all-important spinal discs between your vertebrae.

https://www.instagram.com/p/BWeXIFLF_oJ/?taken-by=wilfredofitness

The goal, really, is to just stand up. When you’re standing tall while holding the weight, you’ve completed the rep. You do not need to try and shrug with your traps. Simply stand up straight, thrust your hips, and focus on squeezing your glutes at the end of the lift.

Lastly, when you reach the top of the rep, you have two options:

1. Dropping the weight
2. Lowering the weight back to the floor

Option #1 is generally considered bad form for most fitness trainees (and definitely will get you some angry glances from your gym’s owner, especially if you aren’t using bounce plates), but there are some times when you may consider it.

Certain training modalities use this pull-and-drop technique—Pavel Tsatsouline employed it with Olympic sprinter Allyson Felix to famous results.

But even if you’re not training for a gold medal, removing the eccentric (lowering) phase may decrease the likelihood of hamstring or lower back injuries. So if those are concerns of yours, you may want to consider using the drop. (And if you do, definitely look for bounce plates.)

But if you’re just looking to build full-body strength, you’re better off lifting and lowering the weight.

That brings us to Option #2. Remember all of that tightness you generated in order to hoist the weight? Don’t let go of it once you reach the top.

Having several hundreds pounds of weight in your hands is typically a bad time to lose rigidity.

Instead, keep all of that tension in your arms, lats, core and legs, and lower the weight to the floor. Continue to keep your feet pressed firmly into the ground. Maintain that tight grip on the barbell as you set the weight back back where it started.

READ MORE: 

How Low Should You Squat, Really?

3 Rules for Building Bigger Arms

The Tension Weightlifting Technique: How to Make Every Exercise More Effective

The post The Complete Deadlift Guide: Master The Full Body Exercise appeared first on Born Fitness.

The idea seems like something you’d see on TV at 3 am, with some cheesy, fit pitchman making too-good-to-be-true claims. As you process the reported benefits—more muscle, less fat—everything in your body screams “scam,” but the source isn’t QVC—it is The New York Times and the rage that is the 7-minute workout.

We’re not talking about a piece of equipment that looks like it was dreamt up by 13-year-old boys, it’s research published in the American College of Sports Medicine Health and Fitness Journal.

Next thing you know, Forbes is writing about the workout and the buzz has spread to Good Morning America. The 7-minute workout is real and it works…at least, that’s what the mainstream media would have you believe. And yet, doesn’t this feel a little played out? I mean, have we already forgotten about “8-Minute Abs?” It’s been nearly 20 years since it was released, and during that time obesity rates have nearly doubled.

Here’s a disclaimer: I don’t have a problem with the 7-minute workout. I take issue with setting unrealistic expectations that trick people into believing a “minimum effective dose” can lead to maximum results. This is the foundation of frustration.

New scientific discoveries are capable of uncovering new information that alters what we believe and thought was true; in fact, it happens all the time. The problem is we oftentimes trust what we want to believe rather than seek to prove if it’s true. That’s the issue with the recent release of the 7-minute workout. We’ve been misled by a catchy title that has some benefits but falls short on long-term promises.

There’s no denying that exercise—in any dose—is good for your body. In fact, when I travel, I’m constantly settling for 10-15 minute workouts instead of my normal 30- to 60-minute session. And you can have a great workout in less than 10 minutes.

But don’t confuse the part from the whole: it is very difficult (and unlikely) to build a healthy body by working out 7 minutes per day and only performing bodyweight exercises, which is the foundation of the 7-minute workout. And I’ll go on record that you’d be hard pressed to find anyone that has. After all, if it only took 7 minutes to get into great shape, the struggle to lose fat would be less of an issue.

Before you start cranking out the “perfect workout” at home and expecting dramatic results or buy into the inevitable 7-minute session coming soon to a gym near you, here’s what you can really take away from the research, and what you can realistically expect to achieve if you follow this routine.

Where the 7-Minute Workout Study Failed

Understand that research in the exercise field oftentimes falls within two categories: Studies that use prior research to validate prior concepts or designs that test something new while building on previous research. The 7-minute workout is more of the former; it looked at the perceived benefits of a 7-minute workout and deduced many benefits based on research that was already completed.

That doesn’t make the research bad or inaccurate, if not for one small problem: The studies used to “prove” the concepts don’t mirror the workout that is being lauded as the 7-minute fix for your body. That’s like saying that because there’s research showing low carb diets help with weight loss that a diet with no carbs will guarantee that you will drop fat. It doesn’t work like that. As always, the devil is in the details.

In the case of this circuit-training program, the claims outpace reality. That’s why I reached out to Brad Schoenfeld, author of The Max Muscle Plan. Schoenfeld is one of the leaders in muscle-building research, and a guy who literally wrote the book on packing on muscle. Here are some of his takeaways:

Not All Circuit Training is Equal

The general idea of the 7-minute workout is that you perform 12 bodyweight exercises as a circuit. This type of exercise is categorized as “high intensity circuit training.” No problem there, but once we moved beyond how to label the type of exercise that’s where the problems begin. “The authors make big leaps that are not substantiated,” says Schoenfeld.

Remember, the justification of this program is validated by prior research explaining why this type of workout will build muscle and burn fat. And yet, three of the four references cited are based on types of high intensity training—not interval training. “And the one circuit training study they do cite by Murphy et al. 1992 used a protocol that was nearly 3 times as long as the one proposed by the authors,” says Schoenfeld.

Even then, that study found a boost in EPOC (consider this your metabolism) that resulted in a whopping 25 additional calories burned. I don’t know about you, but I don’t consider 25 extra calories a fat-shredding workout.

Mistake #1: The type of training in the 7-minute workout is not as good for fat loss as claimed.

[prompted-search initial-state=”open” /]

Not All Exercises Are Equal

The other big flaw of this workout—besides the fact that the benefits are based on dissimilar types of training—is that the design of the program doesn’t lend itself to some of the big claims being made. No matter what anyone tells you, not all exercises are created equal. Some require more effort, activate more muscle fibers, and will generate more results. Does anyone really think that bodyweight squats are as hard as heavy barbell squats?

The authors correctly state, “When resistance training exercises using multiple large muscles are used with very little rest between sets, they can elicit aerobic and metabolic benefits.” That’s true. But if you look at the 7-minute solution, many of the exercises—crunch, plank, side plank—are not large muscle exercises, says Schoenfeld.

Another issue is that these exercises are all bodyweight moves. That’s not to say bodyweight exercise can’t be effective. I’ve seen enough crazy YouTube videos to know that bodyweight moves does a body good. And they are also extremely convenient for anyone without access to a gym. But the greatest benefit of high intensity training—not to mention the circuit training study mentioned–wasn’t performed with bodyweight exercises; they were done with added resistance, says Schoenfeld, where the weight could be manipulated to correspond to a given rep-max. (In other words, a percentage of your max strength.) The use of bodyweight does not afford this benefit, and for those who are fairly fit it would be difficult to achieve a consistent maximum level of intensity for 30 seconds that would compare to doing a similar length of time with added resistance. To use the squat example: Doing 80% of your 1-rep max on squats for a similar period of time would be much more difficult than doing 7-minutes of bodyweight squats.

The use of bodyweight does not afford this benefit, and for those who are fairly fit, it would be difficult to achieve a consistent maximum level of intensity for 30 seconds that would compare to doing a similar length of time with added resistance. To use the squat example: Doing 80% of your 1-rep max on squats for a similar period of time would be much more difficult than doing 7-minutes of bodyweight squats.

What’s more, from an aerobic endurance standpoint, it has been shown that high-intensity interval training (HIIT) can be an excellent alternative to traditional steady-state exercise. “However, the types of exercise performed here are not ideal for accomplishing the task,” says Schoenfeld. Exercises such as the crunch, plank and side plank will have minimal effects on energy expenditure and the amount of calories you can burn.

To further weaken their claims, the 30-second duration is not ideal for building muscular endurance. Generally, you’d want it to be about twice as long to really focus on local muscular endurance, adds Schoenfeld. Even in terms of muscle building, the research is being stretched to muscle-defying limits

Mistake #2: The exercises in the 7-minute workout as not as effective at achieving the reported benefits.

Strength (and Muscle Building) Requires Added Resistance

Just in case you were wondering, it’s also very unlikely that this routine would optimize strength. The low-intensity studies (bodyweight is low intensity) have consistently showed suboptimal strength gains when compared to heavy weight training, says Schoenfeld. “That’s because the big problem with bodyweight exercise is that you are limited to what you weigh—there is no means to overload the muscles within a given repetition range. Thus, this routine would be a poor choice for anyone looking to maximize their strength.”

Mistake #3: Based on the research quoted, in order to receive the optimal benefits suggested by the 7-minute workout you need to add resistance.

What Does The 7-Minute Workout Really Accomplish?

The 7-minute workout undeniably has some benefits. In fact, I gave it a test drive and it was difficult, raised my heart rate, and I’ve been training consistently for more than 15 years. To that end, there is nothing wrong with the workout, and it can be a great solution for anyone looking for a quick workout.

The problem is with the claims being made. The suggested benefits are very overstated for anyone who possesses even modest muscular fitness, says Schoenfeld. More importantly, it is not a well-designed routine for anyone who wants to maximize specific fitness goals such as burning fat, building muscle, or increasing strength. The funny part? The science used to “support” the claims is the same science that proves the claims are inaccurate.

While I wish the promises were true, changing your body will still require more than 7 minutes per day.

READ MORE:

How to Build the Perfect Bodyweight Workout

The Tension Weightlifting Technique: How to Make Every Exercise More Effective

Are Planks Overrated?

Adam Bornstein

Adam Bornstein is a New York Times bestselling author and the author of You Can’t Screw This Up. He is the founder of Born Fitness, and the co-founder of Arnold’s Pump Club (with Arnold Schwarzenegger) and Pen Name Consulting. An award-winning writer and editor, Bornstein was previously the Chief Nutrition Officer for Ladder, the Fitness and Nutrition editor for Men’s Health, Editorial Director at LIVESTRONG.com, and a columnist for SHAPE, Men’s Fitness, and Muscle & Fitness. He’s also a nutrition and fitness advisor for LeBron James, Cindy Crawford, Lindsey Vonn, and Arnold Schwarzenegger. According to The Huffington Post, Bornstein is “one of the most inspiring sources in all of health and fitness.” His work has been featured in dozens of publications, including The New York Times, Fast Company, ESPN, and GQ, and he’s appeared on Good Morning America, The Today Show, and E! News.

The post The Truth About the 7-Minute Workout appeared first on Born Fitness.

A)  What you’re putting on the bar, or 

B)   What’s going on between your ears.

All too often, it’s the not so science-y option (B) that stands in the way. To help remove those limitations and simplify the approach, I asked Dave Dellanave to share why so many people seem to struggle to lift more weight. His approach is refreshingly simple, but also incredibly effective. After all, this is the same guy who can deadlift 315 pounds…with one hand.

Here’s how you can remove some of the common strength barriers and build massive strength. 

4 Reasons You’re Not Getting Stronger

Several years ago I was at a strength training seminar consisting of a handful of training professionals and strength aficionados. Among them was a strong-as-an-ox railroad worker from south Boston. This is the kind of guy who looks at strength feats other people consider impressive levels of achievement and goes “let me try that,” achieving them himself on the very first try.

During the seminar, the instructor starts talking about various borderline-silly strategies people in the fitness space use to “improve movement” or to “prime the nervous system.” Over and over the guy from Beantown would pipe up, “How’s that gonna make me stron-gah?”

It may sound like he was a little crazy, and I assure you was. He also had exactly the right idea.

The bottom line is that there are a few things that will make you stronger – namely, big lifts done with big weight — and a lot of distractions that don’t materially contribute to building strength.

If you can’t look back on the past couple months of training and brag about the new strength feats you’ve accomplished, you’re probably making of one of these key mistakes.

1) You’re trying to fix things that aren’t broken.

In recent years it has become popular to pursue goals such as perfect physical symmetry and movement that passes someone’s arbitrary standard rather than the time-tested standard of lifting more weight on the bar.

The reality is that in the absence of an actual problem — specifically, pain — that prevents you from completing a movement, spending a lot of time on prehab and correctives comes with an extremely high price tag: you’re not spending that time doing things that actually make you stronger.

How can you tell you’ve been swept up in the corrective exercise craze? Your numbers on your favorite lifts haven’t gone up in months but you’re intimately familiar with your foam roller and a one-pound PVC pipe.

Let’s me be very clear: if you have persistent pain, it’s worth seeing a doctor to rule out any issues and to see if you can get them resolved. But, if you’re chasing prehab and corrective exercises because you think there’s going to be a payoff in the long term, my experience tells me that you’d be better off looking for a pot of gold at the end of the rainbow.

2) You’re making it harder, not heavier

On the road to strength, many have wandered off the path…and found themselves balancing atop a BOSU ball.

Men have known for at least a hundred years how to build strength. The incredible Arthur Saxon published The Development of Physical Power in 1905, writing that “it seems reasonable to expect that if your main idea is eventually to succeed in weight-lifting, that as you have to lift iron weights it will be better to practice with iron weights, and the heavier the weights the better.”

You know what’s not described in Saxon’s 19th century book? Using wobble boards, suspension trainers, rubber bands, single-leg training, or other distractions from the singular goal of getting strong.

Yet this was a man who still holds a hundred-plus year bent press record of 370 pounds, was able to snatch 200 pounds with one arm, military press 250 pounds with a single arm, and clean and jerk 342 pounds.

He was able to do this not by finding ways to make his training harder but by progressively lifting heavier and heavier weights in the most basic and fundamental way: with movements such as deadlifts, cleans, presses, and jerks.

There is nothing in strength training that will pay higher dividends than simply lifting a heavier weight, or lifting the heaviest weights you can for more repetitions. And then making sure each week you try to add to this amount. There’s a place for speed/high rep days. There’s also a day for grip days. (Yes, grip can be a big barrier.) But if you don’t have a day (or an exercise) dedicated to simply adding more weight to the bar, you won’t become stronger.

3) Your mindset is holding you back

Before you get too concerned that I’m going to get all new-agey on you and just tell you to let Jesus take the wheel, just trust me on this one for a minute.

There are two ways that people approach training that ends up being to their detriment. The first is the balls-out, fitspo-driven, pre-workout-fueled attack the weights and get one more rep or die trying approach. This high-effort approach uses a program like a minimum baseline guideline — if the program says 10 reps, you are damn sure going to get 11.

What is the result? Poor recovery and a training cycle that flames out midway through.

The flip side of that same coin is an ultra-conservative mindset where you only do exactly what you already know you can do.

Now, I want to be exceedingly clear: I am a big advocate of working within your limits. I don’t think you have to push or force anything to get stronger. But no one ever deadlifts 500 pounds by only deadlifting 200 pounds. At some point you have to test to see where you are.

“Can I do that?” It’s a simple question, but drives a powerful outcome. Asking yourself if you can do something before you attempt it gives you a lot of bang for your buck. First, it lets you mentally assess whether or not something is achievable right now. You are making a prediction: either yes or no. When you either succeed or fail in doing it, you become better at predicting every single time you do it. Second, asking if you can do it implies that you are doing something you’re not assured of success with — a pretty good barometer of being at the edges of your limits.

4) You’re not owning your process

If you read books by the greatest strength athletes of all time or talk to current phenomenal athletes, you will get a different answer from all of them about what works, what they like and dislike, and the various intricacies of their own training. Sometimes they will completely contradict each other – for one guy the only thing that works is doing heavy singles and for the other high volumes of sub-maximal weights are the ticket.

What do they all have in common despite the enormous and myriad differences?

They all individually take responsibility and ownership of their training. Ask an elite powerlifter what his maxes are and not only will he tell you what his best competition lifts are but he will also tell you his best training maxes, his best 2-rep, 3-rep, and 5-rep maxes, as well as a dozen accessory or modified lift best lifts. Ask an elite Olympic lifter what her best lifts are and she’ll tell you her best hang clean, power jerk, block jerk, pause snatch, overhead squat, and so on. They can also tell you where their strengths and weaknesses lie, and how they approach their training in light of that.

In other words, you won’t find too many lifters with impressive strength who say “I don’t know” or “I just follow my program.”

To Get Stronger, Get Stronger

Dan John, the affable strength coach and author known for his many aphorisms (or, Dan John-isms, rather), has a popular saying that “The goal is to keep the goal the goal.” It may seem too trite to be useful, but the reality is, many people get distracted along the way, losing sight of their original goal. Along the same vein, “To get stronger, get stronger” is as simple and effective as it gets.

For some exercises, the answer is painfully obvious that they are not going to make you stronger. Is thirty minutes of walking on the dreadmill going to make you stronger? Obviously not. If you keep the focus on doing things that represent getting stronger — like consistently putting more weight on the bar — you will be steadily rewarded with exactly what you want: more strength.

Your Guide to Strength

What could you accomplish if you were matched with some of the best fitness coaches in the world? Now you can learn how to design a strength program that overcomes barriers and keeps you pushing past plateaus. CLICK HERE to learn more.

READ MORE:

The 4-Step Biceps Builder

Why Weight Machines Are Better Than You Think

6 Exercise Upgrades for Better Results

Adam Bornstein

Adam Bornstein is a New York Times bestselling author and the author of You Can’t Screw This Up. He is the founder of Born Fitness, and the co-founder of Arnold’s Pump Club (with Arnold Schwarzenegger) and Pen Name Consulting. An award-winning writer and editor, Bornstein was previously the Chief Nutrition Officer for Ladder, the Fitness and Nutrition editor for Men’s Health, Editorial Director at LIVESTRONG.com, and a columnist for SHAPE, Men’s Fitness, and Muscle & Fitness. He’s also a nutrition and fitness advisor for LeBron James, Cindy Crawford, Lindsey Vonn, and Arnold Schwarzenegger. According to The Huffington Post, Bornstein is “one of the most inspiring sources in all of health and fitness.” His work has been featured in dozens of publications, including The New York Times, Fast Company, ESPN, and GQ, and he’s appeared on Good Morning America, The Today Show, and E! News.

The post 4 Reasons You’re Not Getting Stronger appeared first on Born Fitness.